TruWeather and Iris Automation link to integrate micro weather sensors in Casia G surveillance system

Micro weather data and analytics firm TruWeather Solutions has joined forces with avionics company Iris Automation to integrate TruWeather’s micro weather services sensors into Iris Automation’s Casia G ground-based surveillance system (GBSS).

 

This meshed network will provide real-time integrated communications, collision avoidance and micro-weather data to operators.

According to a joint press release:

“Micro weather or low-altitude local atmospheric conditions can often substantially differ from

that in higher altitudes, injecting uncertainty into the safety equation. This can significantly impact uncrewed aircraft systems (UAS) and advanced air mobility (AAM) operations and revenue. According to an FAA-funded MIT Lincoln Lab study, currently only 3% of the U.S. has accurate surface weather and cloud ceiling report measurements.

TruWeather CEO, Don Berchoff said:  “This is what we refer to as a “data desert. Up to 40% of crewed aviation flights that are either canceled or delayed due to weather could have flown. Even higher scrub rates will occur for UAS’ flying beyond-visual-line-of-sight, with no pilot on board to spot problems, unless the surface and low altitude weather measurement gap can be closed. The industry requires even more low altitude weather measurements to increase data fidelity and flights per airframe. Without this, uncertain micro weather and wind conditions will result in conservative business decisions. Failure to resolve this problem will result in fewer flights, disgruntled customers and significant revenue losses.”

According to the company TruWeather recently turned its focus to sensor placement and density optimization to capture microscale features with rapid update, at the lowest cost possible. Incorporating weather sensors into Iris Automation’s non-radar based passive ground based system, Casia G, simply made sense for both companies.

“Casia G is a ground-based detect and avoid solution, to allow operators to better detect approaching aircraft and avoid collisions,” said the press release. “It leverages the same artificial intelligence and computer vision technology used in the company’s Casia® series of onboard integrated systems, including its 360 degree / 6-camera system, Casia X. The Casia product line provides unparalleled situational awareness for intelligent decision-making, including alerts and manual or autonomous collision avoidance. All Casia onboard systems can detect a small general aviation aircraft at an average distance of 1.2 km with a 93.2% detection rate. Comparatively, Casia’s milliseconds reaction time exceeds that of human pilots, who take about 12.5 seconds on average to avoid collision threats.

“Because Casia G is sensor agnostic, it can be easily integrated with weather sensors to add real time weather data to nodes (the UA, Casia G, the command center), in addition to its already seamless air and ground-based communications.”

Said Lori DeMatteis, VP of Sales, Marketing and Customer Success at Iris Automation

“Micro weather information is critical to commercial drone operations, avoiding aborted flights and unnecessary risks and overhead in order to meet the FAA 107 weather minimums. combined with Casia G, the TruWeather solution provides up to the minute, highly localized climate information to ensure safe drone operations in one easy setup. This meets the FAA’s stringent requirements and offers the ability to bring together all the required data in one dashboard. This partnership will drive the expansion of BVLOS safety best practices, offering clients immediate value to ensure operational safety, and rapidly changing climate information for emergency preparedness activities, ensuring both public and personnel safety.”

(Image:TruWeather)

Share this:
D-Fend advert. Click for website